• / 30
  • 下载费用:6 金币  

IEC60034-15.pdf

关 键 词:
IEC6003415
资源描述:
IEC 60034-15Edition 3.0 2009-03 INTERNATIONAL STANDARD NORME INTERNATIONALERotating electrical machines – Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines Machines électriques tournantes – Partie 15: Niveaux de tenue au choc électrique des bobines de stator préformées des machines tournantes à courant alternatif IEC 60034-15:2009 ® Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=Hong Kong Polytechnic University/9976803100 Not for Resale, 02/14/2016 06:42:03 MSTNo reproduction or networking permitted without license from IHS--```,,```,``,,,,,,,,,,``,,````,-`-`,,`,,`,`,,`---THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright © 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence. IEC Central Office 3, rue de Varembé CH-1211 Geneva 20 Switzerland Email: [email protected] Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. ? Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…). It also gives information on projects, withdrawn and replaced publications. ? IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. ? Electropedia: www.electropedia.org The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. ? Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: [email protected] Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez l’édition la plus récente, un corrigendum ou amendement peut avoir été publié. ? Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence, texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées. ? Just Published CEI: www.iec.ch/online_news/justpub Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. ? Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé Vocabulaire Electrotechnique International en ligne. ? Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: [email protected] Tél.: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=Hong Kong Polytechnic University/9976803100 Not for Resale, 02/14/2016 06:42:03 MSTNo reproduction or networking permitted without license from IHS--```,,```,``,,,,,,,,,,``,,````,-`-`,,`,,`,`,,`---IEC 60034-15Edition 3.0 2009-03 INTERNATIONAL STANDARD NORME INTERNATIONALERotating electrical machines – Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines Machines électriques tournantes – Partie 15: Niveaux de tenue au choc électrique des bobines de stator préformées des machines tournantes à courant alternatif INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE MICS 29.160 PRICE CODECODE PRIXISBN 2-8318-1033-0® Registered trademark of the International Electrotechnical Commission Marque déposée de la Commission Electrotechnique Internationale ® Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=Hong Kong Polytechnic University/9976803100 Not for Resale, 02/14/2016 06:42:03 MSTNo reproduction or networking permitted without license from IHS--```,,```,``,,,,,,,,,,``,,````,-`-`,,`,,`,`,,`---– 2 – 60034-15 © IEC:2009 CONTENTS FOREWORD...........................................................................................................................3 INTRODUCTION.....................................................................................................................5 1 Scope...............................................................................................................................6 2 Terms and definitions .......................................................................................................6 3 Impulse voltage withstand levels ......................................................................................6 4 Sample tests ....................................................................................................................7 4.1 General...................................................................................................................7 4.2 Impulse voltage withstand test of the interturn insulation.........................................7 4.3 Lightning impulse voltage withstand test of the main insulation ...............................8 4.4 Power-frequency voltage withstand test ..................................................................8 5 Routine tests ....................................................................................................................8 5.1 Coils........................................................................................................................8 5.2 Complete stators .....................................................................................................8 Annex A (informative) Principles involved in the specification of impulse voltage withstand levels and test procedures ......................................................................................9 Annex B (informative) Testing details...................................................................................10 Bibliography..........................................................................................................................12 Figure B.1 – Example of the test circuit for sample tests.......................................................10 Figure B.2 – Example of the test circuit for routine tests .......................................................11 Figure B.3 – Examples of the waveforms from undamaged and short-circuited coils tested directly connected in the stator core...........................................................................11 Table 1 – Impulse voltage withstand levels for sample form-wound coils used in a.c. rotating machines ...................................................................................................................7 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=Hong Kong Polytechnic University/9976803100 Not for Resale, 02/14/2016 06:42:03 MSTNo reproduction or networking permitted without license from IHS--```,,```,``,,,,,,,,,,``,,````,-`-`,,`,,`,`,,`---60034-15 © IEC:2009 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________ ROTATING ELECTRICAL MACHINES – Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60034-15 has been prepared by IEC technical committee 2: Rotating machinery. This third edition cancels and replaces the second edition published in 1995 and constitutes a technical revision. The principal technical changes are as follows. • Change of title to clarify that it is form-wound coils that are being tested rather than machines. • Removal of the limitation on voltage in the Scope. • Additional definitions for consistency with IEC 60060-1. • Reduction in tolerances for the risetime of the steep-fronted impulse voltage. • Guidance on test levels for coils to be used in converter driven machines. • Guidance on voltage levels for routine tests. • Additional figures to show testing details and oscillograms of normal and faulty coils. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=Hong Kong Polytechnic University/9976803100 Not for Resale, 02/14/2016 06:42:03 MSTNo reproduction or networking permitted without license from IHS--```,,```,``,,,,,,,,,,``,,````,-`-`,,`,,`,`,,`---– 4 – 60034-15 © IEC:2009 The text of this standard is based on the following documents: FDIS Report on voting 2/1534/FDIS 2/1547/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. NOTE A table of cross-references of all IEC TC 2 publications can be found on the IEC TC 2 dashboard on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http://webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be • reconfirmed, • withdrawn, • replaced by a revised edition, or • amended. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=Hong Kong Polytechnic University/9976803100 Not for Resale, 02/14/2016 06:42:03 MSTNo reproduction or networking permitted without license from IHS--```,,```,``,,,,,,,,,,``,,````,-`-`,,`,,`,`,,`---60034-15 © IEC:2009 – 5 – INTRODUCTION IEC 60071-1 specifie
展开阅读全文
  麦档网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
0条评论

还可以输入200字符

暂无评论,赶快抢占沙发吧。

关于本文
本文标题:IEC60034-15.pdf
链接地址:https://www.maidoc.com/p-2261694.html
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

[email protected] 2018-2020 maidoc.com版权所有  文库上传用户QQ群:3303921 

麦档网为“文档C2C模式”,即用户上传的文档所得金币直接给(下载)用户,本站只是中间服务平台,本站所有文档下载所得的金币归上传人(含作者)所有。
备案号:蜀ICP备17040478号-3  
川公网安备:51019002001290号 

本站提供办公文档学习资料考试资料文档下载


收起
展开